Autonomous test starters and generators stand

Autonomous test starters and generators stand

This stand is designed to test the operability of starters and car generators with and without burden.

Starters test. The starter is tested at no-load and load mode. The starter is loaded by the generator. The starter is powered with a battery. An external charging device is used to recharge the battery. At this stand is realized the potential to test starters with a cog flywheel module of the car as 2.116 and 2.5. The consumption current is measured during testing the starter.

Generators test. The generator is rotated by the starter through the flywheel for the pulley nut. That allowed testing the generators of different models without making great efforts to readjustment . Using a right-sized hex head with ½ square.

It is possible to test the 24V generators. An extra battery is needed for this. The commutation 12 - 24V is made by switching the toggle switch. The burden is made on automobile lamps. Generators 12V are loaded up to 80 Amperes, generators 24V - up to 40 Amperes.